-40%

Western Electric 302 1940 Metal Restored Working Matching Numbers

$ 131.99

Availability: 100 in stock
  • Condition: Used
  • Brand: Western Electric
  • All returns accepted: ReturnsNotAccepted
  • Featured Refinements: Western Electric 302 Telephone

    Description

    #274
    Western Electric 302
    Metal 1940 - Beautifully Restored
    Fully Functional
    This is a working and beautifully restored Model 302
    metal desk set.  Prior to WW2 the phones were metal.
    During the war and after, the phones were made of
    thermoplastic.
    It has matching numbers dated 1940 on the dial, body and
    induction coil.
    Many hours of time went into restoring this telephone. It was
    disassembled and each component both outside and inside of
    the phone right down to the smallest screw was hand cleaned
    and polished.   The phone has been fully tested, rings nicely
    and has excellent transmission and reception.
    The dial was disassembled, cleaned, lightly oiled and checked
    for
    calibration and works nicely.  The dial number plate
    has a new overlay that has nice crisp numbers.
    The finger stop was polished to a shine on a buffing
    wheel.
    The dial finger wheel is the somewhat rare steel type, most
    are made of lighter aluminum.  It was sanded down to
    metal and repainted.
    The F1 type handset was
    buffed to a nice shine and is in
    excellent condition.
    The Metal body was sanded down to the metal and was
    carefully painted to match the original finish.
    The bottom feet were
    disassembled and the suede leather
    bottoms were replaced with new.
    The base ringer screen was carefully removed and cleaned
    prior to painting the base.
    The cloth line and handset cords are new high quality
    replacements.
    It will  plug into today's modern phone lines.
    The switch hook contacts were cleaned with the original
    Bell
    Telephone
    Seal Bond Paper specially designed f
    or this purpose.
    The contacts were then burnished with original Bell Telephone
    equipment.
    The dual bells and internal parts were cleaned and polished.
    Wiring
    was done according to original Bell Telephone diagrams.
    The phone is fully functional. The sound quality is excellent in
    both transmitting and receiving.  The dual brass gongs give it
    that old time sound.
    All antique rotary phones require a traditional landline
    for dialing
    out.  If you have another type of phone
    service, check with your provider as you may need
    a pulse to tone converter to dial out. They can be
    purchased on eBay and easily added to the end of
    the phone line jack.
    See my other telephones and magnetos
    .
    Ships US Only