SHNITPWR 36V Power Supply Adapter 100~240V AC to DC 36 Volt Converter

Description

Input: AC 100 - 240V, 50/60Hz ; Output: DC 36V, Max 4A 144W ; It can supply with all amps less than 4A. ---such as 1A, 2A, 2.5A, 3A, 3.5A, 4A. If your device draws 3A then 3A will be supplied. But if draws more than 4A, only 4A will be supplied and power supply will be damaged soon. NEVER OVERLOAD!
Output DC connector size is 5.5mm x 2.5mm. Inside"+", outside"-". Please check the size of your device’s power port and confirm if it is compatible with your device. In order to meet more needs, we give away a female DC connector. You can screw wires onto it easily, no soldering required.
Certified by FCC CE ROHS. We focus on producing high quality power adapters. No noise, low temperature operation, no spontaneous combustion, no explosion, no fire hazard, stable output. Automatic overload cut-off, over voltage cut-off, automatic thermal cut-off, short circuit protection.
It is perfect for 5050 3528 36V LED strip lights, 36V flood light spotlight driver, 3D printer, water purifier, massage chair, DC motor, DC pump, inkjet printer, engraver, electric drill and other 36V devices less than 144W.
Product Description
Parameter
Input: AC 100V~240V 50/60Hz
Output Voltage and Current: DC 36V 4A Max ( constant voltage )
Output Wattage:Max 144W
Output DC connector:5.5mm x 2.5mm (inside"+", outside"-")
AC input power cable length: 47.24in / 120cm
DC output power cable length: 43.3in / 110cm
Adapter body size: 6.5in(L) x 2.36in(W) x 1.45in (H)
Safety Compliance: FCC / CE/ RoHS / CCC
Working Temperature: 0~40℃
Weight: 1.35 lb / 610g
Package included
1x 36V 4A power supply adapter
1x AC input power cable
1x DC female connector
Is this DC 36V 4A power supply (PS) compatible with your device?
1.
Please find the spec label of your device and check the working voltage. It should be 36V DC, not be AC 36V or lower/higher than 36V DC. Otherwise, your device will not work or be damaged.
2.
Check the max current your device will draw. It should be equal to or less than 4A,such as 1A,2A,3A,4A. Otherwise, your device won’t work well and the power supply will be damaged very soon.
3.
Check the power input port of your device. Its outer diameter should be 5.5mm; inner core diameter should be 2.5mm or 2.1mm. Inner core polarity should be"+", exterior polarity should be" - ".
4.
If you have a power supply for reference, their output voltage, plug size, polarity should be the same .If our PS’s current is equal to or higher than original one’s, then our PS will work with your device.
Output Amps
3A
4A
5A
10A
4A
8A
Output Volts
36V DC
36V DC
36V DC
36V DC
24V DC
12V DC
Output Port
DC Plug
DC Plug
DC Plug
DC Plug
DC Plug
DC Plug
Output Channel
1
1
3
3
1
1
Input Volts
AC 100V~240V
AC 100V~240V
AC 100V~240V
AC 100V~240V
AC 100V~240V
AC 100V~240V