Premium Coil Cover for Garrett AT/ACE/GTI 2500 Metal Detectors (GAR1606600)

Description

Part no.
1606600
This is a cover for the 8.5" X 11"
PRO
formance
™ DD Seachcoil found on Garrett's AT PRO, AT-MAX, EuroAce & Ace 350/400/400i.
These are also common on the generic coils found on the
TX-850 MD6350 detectors.
Check your coil and look for the DD
PRO
formance
sticker.
Installation instructions:
If installed, remove old coil cover.
Clean surface of the coil with soapy water and dry thoroughly.
Line up the new coil cover with the coil and snap one area into place.
Slowly work your way around the coil then up the middle.  Keep in mind, this should be an extremely tight fit, so take your time.
When completed, double check that the cover is flush against the coil in all areas.
Go find some treasure!  Garrett recommends replacing these yearly so that the coil stays safe for years to come.