Permatex 80057 super 300 form a gasket sealant 118ml 4oz

Description

Original
Permatex
Super “300” Form-A-Gasket® Sealant. Non-hardening sealant designed to resist heat transfer fluids such as oil or antifreeze. Temperature range -65°F to 400°F (-54°C to 204°C); resists antifreeze, aviation fuels, aggressive detergent bearing oils and lubricants.
Pictures are genuine
for the listed item and you will get what you see!
Contact if more than listed quantity required.
Product description:
Permatex SUPER “300” FORM-A-GASKET Sealant is a black, free flowing liquid with a characteristic alcoholic odor. It is an oleo-resinous, fast drying, non-hardening, semi-flexible sealant for all types of assemblies with or without gaskets. Remains tacky after solvent evaporation.
Product benefits:
• For use on all types of gaskets
• Non-hardening
• Seals threads and hoses
• Excellent oil resistance
• Applies easily
Typical applications:
• Compressors
• Diesel engine heads
• Final drives
• Gear boxes
• Power units
• Pumps Transmissions
• High speed turbine Superchargers
Storage:
Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8° and 28°C (46° and 82°F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused product, do not return any material to its original container.
Directions for use:
1. Remove all previous material from mating surfaces. Permatex Gasket Remover is recommended for most materials, not for plastics or painted surfaces
2. For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex Brake and Parts Cleaner
3. Apply a thin, continuous and even bead of product to both surfaces to be sealed. First tracing the internal areas of the gasket configuration, then all surrounding bolt holes as shown below:
4. Allow to air dry for 5 to 10 minutes.
5. Assemble parts immediately while the product is still wet. Secure or tighten to recommended torque specs. Allow 1 hour at room temperature before use. Note: Slight warming decreases drying time.
Note:
NOTE The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. Permatex, Inc. specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Permatex, Inc. products and disclaims any liability for consequential or incidental damages of any kind, including lost profits. This product may be covered by one or more United States or foreign patents or patent applications.
Part is in stock and ready for immediate dispatch!