Permatex 14600 cold weld bonding compound two 1oz 28g tubes

Description

Original
Permatex
Cold Weld Bonding Compound. A 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing. It repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper. Once cured, it can be drilled, tapped, threaded, filed, sanded and painted. Resists most automotive, shop and cleaning fluids. Withstands temperatures to 300°F intermittent. Over 3,000 PSI shear strength on steel.
Pictures are genuine
for the listed item and you will get what you see!
Typical applications:
• Aluminum, steel, brass, bronze, castings and stampings
Storage:
Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8° and 28°C (46° and 82°F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused product, do not return any material to its original container.
Directions for use:
1. Surface must be clean, dry and free from grease and dirt. Use Permatex® Brake & PartsCleaner for best surface preparation; use isopropyl alcohol on plastics. To improve bond strength, roughen bond area with coarse sandpaper or wire brush prior to application.
2. Squeeze out equal amounts of weld agent and hardening agent; mix thoroughly until color is uniform.
3. Apply to surface being repaired and remove excess material immediately.
4. Sets in 8 minutes. Allow 16 hours (overnight) before returning part(s) to service.
Note:
NOTE The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. Permatex, Inc. specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Permatex, Inc. products and disclaims any liability for consequential or incidental damages of any kind, including lost profits. This product may be covered by one or more United States or foreign patents or patent applications.
Part is in stock and ready for immediate dispatch!