Garrett Z-Lynk Wireless System Transmitter and receiver with 1/4 headphone jack

Description

Garrett Z-Lynk Wireless System. Transmitter and receiver with 1/4" headphone jack connector. Use your favorite land headphone with 1/4" plug and go wireless! All the benefits of using headphones, without being tied to your metal detector. Nearly universal; designed to work with most metal detector brands and most wired headphones. Note: Z-Lynk Wireless System requires use of headphones with a 1/4" headphone jack (not included).
*ITEMS SHOWN IN PICTURES ARE THE ITEMS THAT ARE INCLUDED*
Key Features
Freedom
—all the benefits of using headphones, without being tied to your metal detector.
Lightning-fast speed
—Near-zero delay (17-milliseconds) from your detector to your headphones. Six times faster than Bluetooth speed, and up to four times faster than other wireless headphone kits.
Versatility
—Nearly universal; designed to work with most detector brands and most wired headphones.
Frequency-Hopping Technology
—Creates an infinite number of channels to prevent interference with nearby headphones and wireless devices.
Extended Hunting Time
—Get up to 30 hours of operation per charge. Recharge the Z-Lynk modules with any micro-USB charging port—on your laptop, in your car, or with a USB power block such as a smartphone charger.
Can be used on both VLF (single frequency) and pulse (multi-frequency) detectors.
Additional Info:
Recharge the Z-Lynk transmitter and receiver modules with the supplied cables by attaching them to a laptop, your vehicle’s USB port, or a phone charger’s USB power block.
Each module has an Auto-Off function that will switch off power after 30 minutes of inactivity.
Specifications
Speed:
17 millisecond delay (6 times faster than Bluetooth)
Operating Frequency:
2.4 GHz band frequency hopping
Environmental:
Water resistant; do not submerge.
WR-1 (receiver): IP 52: protects against light rain. WT-1 (transmitter): IP 64: protects against heavy rain.
Battery type:
Rechargeable Lithium Ion
Charging:
Micro-USB charging port (cables included)
Operating time:
30 hours per charge (approx.)
Certifications:
FCC, CE, IC
Operating Temperature:
-20° (-4° F) to 60° C (140° F)