Doc's AFTER-MARKET Replacement Bungee cord for your Minelab Pro-Swing Harness

Description

This
IS NOT
a Minelab product
Doc's
after market Replacement Bungee
cord to replace worn out bungee from
Minelab Pro-Swing Harness
You must have the adjustment clip
from your old bungee.
Manufactured and Distributed by
Doc's Detecting Supply
Henderson, Nevada
If you are like me you love your Minelab Pro-Swing harness.  However, the bungee is the one item that gets the most wear and tear.
Now you can have a fresh brand new bungee.  Simply cut your old bungee and pull off the Minelab adjustment clip.  Keep the clip and throw the old worn out bungee away.
Now take Doc's new after market replacement bungee and restring it through the Minelab adjustment clip.
Use the included piece of thick walled glue lined heat shrink tubing and put it on the plain end of the bungee.  You can either leave the end as is and put the heat shrink tubing on it, or loop it like the other end.  Once you have the heat shrink tubing adjusted the way you want it.  Heat it with a hair blower.  The heat will simultaneously melt the glue inside the tubing and shrink it to a perfect fit on the bungee.
You will need a heat gun or hair blower to heat the shrink tubing to get it to shrink and soften the glue inside.
HERE'S WHAT YOU GET!
1.
One (1) high quality piece of bungee, the same length as the Minelab original, with a loop on one end.  The other end is left without a loop so you can string it through the Minelab adjustment clip.
2.
A piece of thick walled glue lined heat shrink tubing to terminate the plain end.
*Doc's Detecting Supply is a Certified Minelab® dealer.
**G.M. "Doc" Lousignont, Ph.D. is one of only a handful of Minelab Certified Gold Machine Trainers in the United States.
Doc is regarded around the world as an expert in the field of Electronic Gold Prospecting.  YouTube Channel: DocsDetectingSupply.