Detect-Ed Black LS Carbon Fiber Upper & Lower Shaft for Minelab Equinox Detector

Description

DETAILS
Detect-Ed Black LS Carbon Fiber Upper & Lower Shaft for Minelab Equinox Series Detectors.
The Land & Sea Carbon Shaft is a single piece to replace the upper two sections of the stock Minelab Equinox shaft, ideal for underwater and land detecting. The LS model’s light-weight, no-wobble, strong design proves steadfast in durability and is a long-lasting investment.
This Land & Sea Carbon Shaft complements the Equinox by further enhancing it’s lightness and all-terrain abilities.
The Land & Sea Carbon Shaft ‘Lower’ is a single piece to replace the lower rod of the stock Minelab Equinox shaft, ideal for underwater and land detecting.
This lower shaft is designed
only
for use with the Detect-Ed LS Carbon Shaft ‘Upper’.
Compatibility
Minelab Equinox 600
Minelab Equinox 800
Specifications
Upper Shaft Length: 32.5″ (approx.)
Lower Shaft Length: 24.25″ (approx.)
Features
100% Carbon Fiber –
Black Carbon with a matte finish, for greater scratch resistance
35% Lighter –
Than stock Equinox upper shaft (120g vs 186g)
50% Lighter
– Than stock Equinox lower shaft (50g vs 100g)
Collapses Shorter
– Shortens to 170mm shorter (overall length)
Shortened Position –
Ideal for water use and transport
New Clamp System
– Custom plastic injection moulded clamp system extremely durable and hard clamping design suitable for lower rods 19-20mm
High-grade Stainless Steel
– Stainless 316 hardware for corrosion resistance
Fully Extends –
Lengthens to original length for normal use
Durable –
Matte-finished Carbon for far greater scratch resistant than its glossy counterparts
No Wobble –
Provides a strong, crisp swing
Unique Hole-less design
– When assembled the LS-Carbon upper shaft has no exposed holes for pins or arm cuff adjustments, this means the shafts gets very little dirt or sand inside it while out detecting and contributes to it’s very sleek look and unmatched structural integrity.
Easy Installation
– Simply remove your control pod (with the hex key we provide), remove the arm cuff, install them on your Detect-Ed carbon shaft and slide in your existing lower shaft and coil
Drainage System –
Easy drainage hole for water detecting and cleaning.
Eliminates Coil Ear wear –
Custom coil connector design significantly reduces Coil Ear wear which means your Coil Ears are less likely to snap.
STORE
RADIOS
RADIO ACCESSORIES
ANTENNAS
ELECTRONICS
Detect-Ed Black LS Carbon Fiber Upper & Lower Shaft for Minelab Equinox Detector
DETAILS
Detect-Ed Black LS Carbon Fiber Upper & Lower Shaft for Minelab Equinox Series Detectors.
The Land & Sea Carbon Shaft is a single piece to replace the upper two sections of the stock Minelab Equinox shaft, ideal for underwater and land detecting. The LS model’s light-weight, no-wobble, strong design proves steadfast in durability and is a long-lasting investment.
This Land & Sea Carbon Shaft complements the Equinox by further enhancing it’s lightness and all-terrain abilities.
The Land & Sea Carbon Shaft ‘Lower’ is a single piece to replace the lower rod of the stock Minelab Equinox shaft, ideal for underwater and land detecting.
This lower shaft is designed
only
for use with the Detect-Ed LS Carbon Shaft ‘Upper’.
Compatibility
Minelab Equinox 600
Minelab Equinox 800
Specifications
Upper Shaft Length: 32.5″ (approx.)
Lower Shaft Length: 24.25″ (approx.)
Features
100% Carbon Fiber –
Black Carbon with a matte finish, for greater scratch resistance
35% Lighter –
Than stock Equinox upper shaft (120g vs 186g)
50% Lighter
– Than stock Equinox lower shaft (50g vs 100g)
Collapses Shorter
– Shortens to 170mm shorter (overall length)
Shortened Position –
Ideal for water use and transport
New Clamp System
– Custom plastic injection moulded clamp system extremely durable and hard clamping design suitable for lower rods 19-20mm
High-grade Stainless Steel
– Stainless 316 hardware for corrosion resistance
Fully Extends –
Lengthens to original length for normal use
Durable –
Matte-finished Carbon for far greater scratch resistant than its glossy counterparts
No Wobble –
Provides a strong, crisp swing
Unique Hole-less design
– When assembled the LS-Carbon upper shaft has no exposed holes for pins or arm cuff adjustments, this means the shafts gets very little dirt or sand inside it while out detecting and contributes to it’s very sleek look and unmatched structural integrity.
Easy Installation
– Simply remove your control pod (with the hex key we provide), remove the arm cuff, install them on your Detect-Ed carbon shaft and slide in your existing lower shaft and coil
Drainage System –
Easy drainage hole for water detecting and cleaning.
Eliminates Coil Ear wear –
Custom coil connector design significantly reduces Coil Ear wear which means your Coil Ears are less likely to snap.
Payment
Shipping
Returns
Payment
Payment
Shipping
Returns
Payment
PayPal is our preferred method of payment. If you do not have a PayPal account, all major credit cards are gladly accepted through PayPal as the payment processor. PayPal offers great buyer and seller protection. Your order will be processed pending receipt of cleared payment through PayPal. Sales tax may be charged depending on your location.
Payment
Shipping
Returns
Shipping
Payment
Shipping
Returns
Shipping
Shipping is FREE to all addresses other than APO/PO boxes in the lower 48 states. All our stock ships from our US-based Fullfillment Partners (USFILL & FBA) Your package may can have stickers from these companies on it. Shipped via USPS or UPS (depending on location and package weight) Unless stated otherwise, all orders will ship within 24 hours of your payment being processed.
Payment
Shipping
Returns
Returns
Payment
Shipping
Returns
Returns
We offer a 30 day return policy for most of our products. Only factory defects are accepted as a reason for a FREE return. When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it. The item and package should be in original and perfect condition. You will be required to cover shipping on the return of non-defective items. All returns MUST be done within 30 days of date of purchase. Please note that we cannot give refunds or replacements after the 30 day limit has expired. When sending in a return, please note that it can take up to 7 business days for the return to be processed.
Feedback
Favourites
Contact Us